Free forum by Nabble. To auto-restart the interface with a predefined interval use the -R flag and specify the interval in milliseconds. There’re lots of things that could go wrong. NI’s instructions can be found here: Email Required, but never shown.

Uploader: Meztikazahn
Date Added: 5 June 2013
File Size: 32.53 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 95356
Price: Free* [*Free Regsitration Required]

And these kernel-internals change frequently. I hope this helps.

If you do want to use the new kernel, I would recommend that you skip the lknux naming steps so that the new kernel will have a different name. Nearly all automotive based sensors publish data to the CAN bus at K baud.

Socket-CAN Users – Usage of Kvaser Leaf Light HS USB

Secure boot is configured through the machines BIOS. Message 8 of 9.

At least one difference was my version of GCC. To auto-restart the interface with a predefined interval use the -R flag and specify the interval in milliseconds.

Granted though, once one is hacked it is easy enough to repeat. Core is able to load one CAN driver at a time. This makes porting applications that use Kvaser hardware between Windows and Linux easier. If I want to modify the existing driver, which files into the socketcan project can I take as reference?


can_interfaces:main – CAN Wiki

This is likely caused by lihux the wrong baudrate set in the canmonitor example, vkaser what the CAN sensor is publishing. The hardware identifier is unique to each physical hardware device, where each device has one or more channels.

Message 9 of 9. On Kvaser’s website they have their own drivers available which are based on socketCAN, but are distinctively different. But notice, that the drivers in the branch are still under development and the drivers in the trunk except the vcan driver do not have any common configuration interface Therefore the device driver model is a network device driver like your ethernet card and NOT a character device like e.

How to Setup Kvaser on Linux [Ubuntu]

In my case it was 4. Message 6 of 9.

Thank you for the information and advice. Keep in mind, that any changes to the kernel, including 3rd party drivers can change the performance of the device. Message 3 of 9. Check the kernel docs. All nodes on a given host must use either linuxcan or all nodes must use socketcan drivers to communicate with CAN interface hardware. I ended up using the 6. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Unless you’re a kernel hacker or wanna become onebetter don’t burn your time with OOT-modules.


My boss has decided like you mentioned that hacking the kernel would incur too much cost for this project.

The circuit identifier is an index for multi-channel CAN hardware interfaces. Thank you for the reply. Message 1 of 9. All of my comments are in regards to my specific hardware and software configuration. Sign up using Email and Password. I found that going to http: Core enables the socketcan drivers to communicate with CAN hardware by default.