If the icon is blue that means it’s logged in and registered, but not in a storage group. Configure hardware for MPIO. There are only slight variations for other combinations. Somewhat weird since I have PP. Set default language Do you wish to save this as your future site? Now we came to know yesterday itself that MPIO is not enabled on the server and we need to install MPIO feature on all the server and configure the policy. The “-n” switch suppresses the automatic reboot.

Uploader: Kazrarr
Date Added: 12 December 2016
File Size: 17.64 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3672
Price: Free* [*Free Regsitration Required]

The unreadable LUN is definitely the lunz. High Availability Xgc https: It is possible that updates have been made to the original version after this document was translated and published. Obviously this is disruptive, so be prepared to reboot.

But now Rais am not sure about the cluster thing as I have checked the same on standalone servers and it is working fine. Now, the only thing about this is that I have never tried this after I had built a cluster.

Is there any command or any technique which can help me out to get this stuff. A SCSI-3 SCC-2 term defined as “the logical unit number that an application client uses eaid communicate with, configure and daid information about an SCSI storage array and the logical units attached to it. I have installed naviagent 6. Look for the entry about half way down called Source IP: For help type inq -h. Veritas does not guarantee the accuracy regarding the completeness of the translation.


By continuing to browse this site, you agree to this use.

An EMC Clariion Storage array with LUNs in RAID-6 is not recognized in VEA with DMP DSM

Get Support Create Case. You may also refer to the English Version of this knowledge base article for up-to-date information.

May be some one else at technet can help me about scsl after effects of getting MPIO on cluster systems. Please consult EMC support prior to making any changes. The latest versions for supported operating systems can be found on EMC’s ftp server at ftp: However, now a unreadable disk appears in my disk manager as well as my working one.

It almost seems like the unreadable deevice a ghost entry. However, Powerpath does not detect anything at all.

Not an IT pro? I did remove another lun from storage before rebooting. I have only one LUN in storage group the working one.

If the icon is blue that means it’s logged in and registered, but not in a storage group. We have 6 node hyper-v clusters running 20 vm. You need to check in Connectivity Status to ensure that you have all paths from the server logged in and registered.

New Drivers  STLAB U-350 DRIVER

The LUNZ value shall be zero. Hi, Thanks I did it and its working fine. Everything appears fine on the SAN.

Drivers >>> DGC RAID 5 SCSI Disk Device driver

Without the LUNZ devices, there would be no device on the host for Navisphere Agent to push the initiator record through to the array. This utility will operate independently of any other EMC software. In the CLARiiON context, LUNZ refers to a fake logical unit zero presented to the host to provide a path for host software to send configuration commands to the array when no physical logical unit zero is available to the host.

Support Knowledge Base Cheers Cheers Message was edited by: This is mandatory for the host to log in to the Storage Group.